Triac at work video

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Triac at work video

Post by Triac whizz » Mon 22 Jan , 2007 22:12 pm

Just for giggles I've uploaded a video of my Triac hammering a 18mm U drill through ali at 3500rpm and 200mm/min, the vid goes on and shows the whole job, there's no interval for popcorn & ice cream I'm afraid :)

https://video.google.co.uk/videoplay?doc ... 7361361204

broadband recomended
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
User avatar
davidimurray
CNC Expert
CNC Expert
Posts: 194
Joined: Thu 24 Aug , 2006 9:45 am

Post by davidimurray » Tue 23 Jan , 2007 16:15 pm

Nice video.

Is that a stepper or a servo machine? Original controls or a retrofit?

When I get a min will post some vids of the starturn at work.

Cheers

Dave
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Fri 26 Jan , 2007 11:18 am

Fanuc controls - out of the box as it left Denfords, give or take a few parameter changes :)
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Fri 26 Jan , 2007 11:54 am

Nice - what is it ?

btw - no guards on your machine ? :?
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Fri 26 Jan , 2007 12:29 pm

It's a bearing block see viewtopic.php?t=342 the thingys on the right

Guarding? It's all there - for what its worth but it was down for the video and I can't put it right up when I have a vice on the table - and wellies are obligatory when using suds! Is there something missing then? perhaps a cagoule? :mrgreen:
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
Post Reply

Return to “Triac”