We have a redundant Denford MIRAC which we are hoping to sell. The machine hasn't been used for appx. two years but is in good working order. We are a school in Bath and part of the deal would be buyer collects. Anyone interested?
Posts: 1
Joined: Wed 07 Oct , 2009 8:52 am
Hi,
What side of Bath are you? How easy is it to get at the lathe, i.e. is it buried in a store room or still in a workshop?
What side of Bath are you? How easy is it to get at the lathe, i.e. is it buried in a store room or still in a workshop?
CNC Guru
CNC Guru
Have you got any more details?
Mirac / Mirac PC ?
Date of manufacture?
Mirac / Mirac PC ?
Date of manufacture?
It is a MIRAC NS. manufactured 2003. software vr 1.9. net weight 280kg.
The machine is in good working order. I have cleaned it, made sure the chuck rotates and axis move. The machine has been used very little in the last six years. we also have a heavy workbench for it to stand on(Denford). We can get it outside of our DT workshop but buyer would need a trailer or medium van as we are accessed down a fairly narrow track. Also have a good amount of accesories, tools etc. Very happy to arrange a viewing. We are on the South Side of Bath, BA2 5AH. /color]:
The machine is in good working order. I have cleaned it, made sure the chuck rotates and axis move. The machine has been used very little in the last six years. we also have a heavy workbench for it to stand on(Denford). We can get it outside of our DT workshop but buyer would need a trailer or medium van as we are accessed down a fairly narrow track. Also have a good amount of accesories, tools etc. Very happy to arrange a viewing. We are on the South Side of Bath, BA2 5AH. /color]:
Attachments:
- lathe tools.jpg (46.99 KiB) Viewed 13276 times
- lathe screen 1.jpg (33.63 KiB) Viewed 13276 times
- lathe chucks.jpg (34.16 KiB) Viewed 13276 times
- lathe and screen.jpg (28.67 KiB) Viewed 13276 times
Posts: 9
Joined: Thu 15 Oct , 2009 15:44 pm
Hi, do you have a rough price you are looking for please, thanks.
Rich
Rich
CNC Expert
CNC Expert
It would appear to be on Ebay for £3000ricky b wrote:Hi, do you have a rough price you are looking for please, thanks.
Rich
https://cgi.ebay.co.uk/Denford-Mirac-CNC ... 5d26944b18
Regards
Rob
.
We have an 'almost definitely' buyer awaiting a final agreement. Thank you for your interest.
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Site Admin
We look forward to seeing him/her on here then 
Posts: 14
Joined: Sat 29 Dec , 2007 12:30 pm
Hardware/Software: vertical router and mirac lathe
Location: J.C.FREEMAN@BTINTERNET.COM
Contact:
Well I bought the Mirac lathe but there is no technical manual with it, can anyone help please
jcf
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact: