We have recently purchased an easimill 3 second hand and the display lives no longer, so we are looking for advice on how to replace the display. We have noticed the video output on the back could anyone advise us if this could be utilised in any way through a PC.
Would also be interested in electrical drawings if they are still avaliable.
Posts: 11
Joined: Tue 26 May , 2009 15:20 pm
Posts: 2
Joined: Fri 16 Feb , 2007 15:16 pm
Hi there
I have a Easimill 3 display surplus to requirements if you are still looking for one. Please let me have your telephone number if you are, and I will give you a call.
Terry
I have a Easimill 3 display surplus to requirements if you are still looking for one. Please let me have your telephone number if you are, and I will give you a call.
Terry
Posts: 11
Joined: Tue 26 May , 2009 15:20 pm
Thanks for your response but we have managed to purchase a display, again many thanks
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Site Admin
Brodley - it looks like your original post was missed, sorry about that - I think I've since uploaded some easimill/turn maintenance manuals which may have helped.
Any chance you could post up details on how you fixed the display, where you got a new one etc... Cheers
Any chance you could post up details on how you fixed the display, where you got a new one etc... Cheers