Can I ask anyone in the "know" the correct procedure to use when downloading and uploading programs in the controller to the pc. Do parameters need setting, baud rates etc, plus what should the Com port be cofigured to on the pc.
I have a Fanuc OT controller.
Can I use the freebie program from Heidenhain called TNC server that I use for my Bridgeport mills to send and recieve said programs, or is there another better freebie around?
Bob
Site Admin
Some useful links on RS232 software:
Various RS232 DNC software discussed here:
viewtopic.php?f=4&t=1040
modern DNC software from here https://www.cadem.com for FREE:
viewtopic.php?f=4&t=2043&p=7154
Industrial Text Editor software, DOS, free and does RS232 comms
viewtopic.php?t=256
Denford Industrial Text Editor Manual:
viewtopic.php?f=15&t=2056
Various RS232 DNC software discussed here:
viewtopic.php?f=4&t=1040
modern DNC software from here https://www.cadem.com for FREE:
viewtopic.php?f=4&t=2043&p=7154
Industrial Text Editor software, DOS, free and does RS232 comms
viewtopic.php?t=256
Denford Industrial Text Editor Manual:
viewtopic.php?f=15&t=2056