Machine mis-match error MESSAGE!

[tdavi184]

When we connect to our microrouter compact the machine mis-match error is displayed. The error says 'the machine selected in software is the microrouter compact' (our machine). 'The actual machine you are connected to is a NOVAMILL'.

How do we fix this? We know our machine is a Microrouter compact yet vr milling keeps thinking it is a NOVAMILL.

The machine is connected via USB to the computer.

Thanks,

Tim

[bradders]

Use the instructions above and select MICROROUTER COMPACT from the options instead of MICROROUTER and see if this solves the problem

[Denford Admin]

Have you had a replacement Baldor USB board recently ? That could explain why the software thinks its connected to the wrong machine.

The machine type (ie NOVAMILL) setting is programmed into the Baldor top board by easyupgrader.

[tdavi184]

Thanks for the reply. We have had the Baldor USB board changed recently. The easy upgrader is saying that the machine is a novamill. How do we change this?

Thanks.

Tim

[Denford Admin]

Its ok - I pm'd the password you need to get into the machine type editing (not denny) - he replies saying it worked ok and all is good now

We don't want everyone knowing the other password as damage could be done to the machines