VL300 Connection to PC & Firmware

[Crakkers]

Hi

Installed versa laser on standalone PC. everytime I switch PC on it states new hardware found and looks for firmware. Laser extraction is constantly switched on - noisy! but can not control machine via PC.

Please advise exactly what software I need to download. Original disks are lost!!!

Op system is XP

[bradders]

Get ver 1.28.5 from the link below

https://www.website.denford.ltd.uk/suppo ... -downloads

[Crakkers]

does not answer the question.

why does new hardware found come on everytime I boot PC up, even though software has been installed and reinstalled many times, as per your instructions?

[Martin]

It sounds like you have a problem on one of the USB devices.

Try looking at the USB devices in device manager & check that they are all installed correctly. If one shows a error then try to update the device.

[Steve]

It is probably somthing to do with access rights on the computer.

Have you tried logging on as an administrator then loading the laser drivers. It may be as a standard user the changes you are making each time are not being saved.

[ULS Service]

it looks like the usb board from your pc, does search it every time, because otheriwse there will be no reason, why it alswys shows you that a new device was found.
Maybe try to connectg the machine to another usb board on your pc or try to upgrade your usb board drivers.

regards
Bernhard