Triac Baud rate Dip Switches

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Roy
CNC Expert
CNC Expert
Posts: 104
Joined: Tue 30 Jan , 2007 20:20 pm
Hardware/Software: 1986 Triac modified & running Mach 3
Location: Bucks, UK

Triac Baud rate Dip Switches

Post by Roy » Fri 23 Feb , 2007 9:58 am

With Refererance to my earlier posting viewtopic.php?t=756
I would like to have a play around with The Baud rates for my '86 Triac, to see if this will solve my RS232 link problem. However lookiing ing the manual I can not find any info on the switch settings. I assume the dip switches are the little Blue bank on the Datum/aux section, as these are only switches I can see.

Any help on switch settings would be appreciated :D

Thanks Roy
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Fri 23 Feb , 2007 10:04 am

Roy, is this link any good ?

viewtopic.php?t=518&highlight=dip
Top
User avatar
Roy
CNC Expert
CNC Expert
Posts: 104
Joined: Tue 30 Jan , 2007 20:20 pm
Hardware/Software: 1986 Triac modified & running Mach 3
Location: Bucks, UK

Post by Roy » Fri 23 Feb , 2007 21:44 pm

Thanks Bradders, unfotunatly it did'nt help much. but I have now sussed the Dip Switches, although changing the Baudrates still havent solved my communication problems. :cry: :cry:
Top
Post Reply

Return to “Triac”