What size is the t slot table that was originally supplied with the routers and how are they attached to the aluminium rails. Looking to get one shortly and I dont want to have to reinvent the wheel if necessart.
Many thanks
Mike
Posts: 17
Joined: Thu 30 Jul , 2015 13:19 pm
Hardware/Software: microrouter v3 with 2.31
Location: Glenrothes
Contact:
CNC Guru
CNC Guru
Here are a few bits that may help
Attachments:
Posts: 27
Joined: Tue 13 Dec , 2016 23:36 pm
Hardware/Software: Novamill
- in process of upgrading controller to Mesa I/O and LinuxCNC
- retrofitting head with power drawbar
- and next year, raise column by 70mm
Microrouter V3
Micromill 2000
- in process of upgrading controller to Mesa I/O and LinuxCNC
- retrofitting head with power drawbar
- and next year, raise column by 70mm
Microrouter V3
Micromill 2000
Are these tables still available, or where/are they a 3rd party item?
Thanks
J
Thanks
J
Perhaps showing my ignorance:
The shape of the T-slots is curved towards the bottom and normal clamps' don't fit. Is this specific type of t-bed, with unique fittings and where can they be found?
The shape of the T-slots is curved towards the bottom and normal clamps' don't fit. Is this specific type of t-bed, with unique fittings and where can they be found?