Lathe accessories

Fri 20 Jul , 2012 9:07 am

Found this while looking through some bits I had scanned previously. Posted it as Dazz has made his own and there seemed to be a lot of interest in it.

Edit by Andy B - the post by Dazz is here

dazz · Fri 20 Jul , 2012 12:18 pm

Hi

My taper attachment is a genuine Denford factory original.
I made skates to follow the straight edge. These skates are intended to optimise surface finish.

Fri 20 Jul , 2012 12:45 pm

Ah sorry

I thought you'd made one...must have been someone else

Andy B · Thu 21 Aug , 2014 15:55 pm

Here are some component drawings for the taper turning and copying attachment.

I'll add more as I find them.

rpwilson · Fri 22 Aug , 2014 2:36 am

Excellent!

Richard

Andy B · Mon 18 May , 2020 7:52 am

Collet Attachment drawings:

Assy - ML107

ML107.PDF: Collet Assy; (53.09 KiB) Downloaded 1111 times

Handwheel - ML107-1

ML107-1.PDF: Handwheel; (85.21 KiB) Downloaded 1030 times

Drawbar - ML107-4A

ML107-4A.PDF: Drawbar; (73 KiB) Downloaded 1013 times

Please don't post comments in this thread - put them in the general threads section.

Andy B · Tue 09 Feb , 2021 11:20 am

Boring Table and Milling Attachments

ML118/1 Boring table

ML118-1 Boring Table.pdf: (338.3 KiB) Downloaded 836 times

ML130/1 Swivel Plate Slide, Milling Attachment

ML130-1.PDF: (103.47 KiB) Downloaded 865 times

ML130/2 Swivel Tenon Plate, Milling Attachment

ML130-2.PDF: (102.96 KiB) Downloaded 835 times

ML130/3 Swivel Vice, Milling Attachment

ML130-3.PDF: (85.92 KiB) Downloaded 837 times

ML130/4 Vertical Slide, Milling Attachment

ML130-4.PDF: (149.65 KiB) Downloaded 828 times

ML130/5 Adjusting Screw, Milling Attchment

ML130-5.PDF: (90.12 KiB) Downloaded 826 times

ML132 Universal Milling Attachment

ML132 Universal Milling & Drilling Unit.pdf: (435.42 KiB) Downloaded 812 times

ML132/1 - Boring Table, Universal Milling Attachment

ML132-1.PDF: (141.38 KiB) Downloaded 800 times

ML132/3 - Packing Plate, Universal Milling Attachment

ML132-3.PDF: (130 KiB) Downloaded 771 times

ML132/6 - Angle Plate, Universal Milling Attachment

ML132-6.PDF: (78.92 KiB) Downloaded 793 times

Please don't post comments in this thread - put them in the general threads section.

Information