attached is a link to the NovaTurn Literature.
viewtopic.php?f=12&t=2303
CNC Expert
Thanks,
One thing that caught my eye was that the extra equipent quoted spray mist coolant, I thought that the Novaturn and the Novamill wasnt good for use with coolant but perhapse I was wrong.
Does anyone know what the spray mist coolant option was, and what coolant was specified?
Cheers
BPM
One thing that caught my eye was that the extra equipent quoted spray mist coolant, I thought that the Novaturn and the Novamill wasnt good for use with coolant but perhapse I was wrong.
Does anyone know what the spray mist coolant option was, and what coolant was specified?
Cheers
BPM
CNC Guru
Hi,
As spraymist can be set to be very fine you do not need a drain to take the stuff away.
We currently use a system based the attached system.
https://www.littlemachineshop.com/produc ... uctID=4278
Includes one pint of Kool Mist 77 which makes 4 gallons of coolant.
As spraymist can be set to be very fine you do not need a drain to take the stuff away.
We currently use a system based the attached system.
https://www.littlemachineshop.com/produc ... uctID=4278
Includes one pint of Kool Mist 77 which makes 4 gallons of coolant.
CNC Expert
Thanks for that,
I'll look into something equivalent sourced from the UK.
Cheers
BPM
I'll look into something equivalent sourced from the UK.
Cheers
BPM
CNC Expert
Does anyone have a picture or drawing of the swarf tray? I'm guessing its just a rectanglular piece of formed sheet metal.
Cheers
BPM
Cheers
BPM