Hi! I`m just about to take out the original driver boards and some of the power supply parts from my starturn 4 as I am upgrading to new stepper motors and controllers. If anyone is interested in the electronics and the original stepper motors then let me know!
Mike
CNC Apprentice
Here are all the bits I have for sale...
The stepper motors would be included as well.
The stepper motors would be included as well.
Attachments:
- DSC_0435.JPG (231.63 KiB) Viewed 5953 times
Site Admin
It'd be worth putting on what type the drives are (eg, parker SD2)
And do you still have the other side of the connector to the drives ? ie, so people can solder wires to it if they weren't replacing like for like
And do you still have the other side of the connector to the drives ? ie, so people can solder wires to it if they weren't replacing like for like
CNC Apprentice
Good idea 
The main board says Syntel 1984 and the drivers are PKS Digiplan SD2
I would include all the connectors too, but for now, they are still on the wiring loom.
The main board says Syntel 1984 and the drivers are PKS Digiplan SD2
I would include all the connectors too, but for now, they are still on the wiring loom.
CNC Apprentice