CNC Guru
Error # 38 " Fixture Error "
• Cause: Auto Z failure because of erroneous fixture height, usually due to corrupt Z value
• Response: Re-home Z and check lens height with fixture installed.
If this doesn´t help, I would recommend to restart the computer (also change the USB port) and remove other USB devices. This is to make sure that this is not related to the machine.
• Cause: Auto Z failure because of erroneous fixture height, usually due to corrupt Z value
• Response: Re-home Z and check lens height with fixture installed.
If this doesn´t help, I would recommend to restart the computer (also change the USB port) and remove other USB devices. This is to make sure that this is not related to the machine.