Hello
I made the spinning wheel and holder for my lathe. The wheel is mounted on ball bearings. It is polished and hardened.
Dazz
CNC Expert
Attachments:
- The wheel being machined on the lathe.
- IMG_1297 (855 x 642).jpg (89.04 KiB) Viewed 8040 times
- The hardened and polished wheel.
- IMG_1303 (800 x 600).jpg (60.56 KiB) Viewed 8040 times
- The finished roller mounted in the holder.
- IMG_1304 light (528 x 396).jpg (24.61 KiB) Viewed 8040 times
Regards
Dazz
Dazz