All info relating to the Denford Triac series of CNC milling machines
4 posts • Page 1 of 1
- CNC Apprentice
- Posts: 80
- Joined: Thu 12 Sep , 2013 20:02 pm
- Hardware/Software: Cyclone TU150E (Running KMotionCNC with Servos)
Novamill running V5
According to the list of wire numbers I've made up, 21 is one of the spindle motor power wires. 20 being the other power wire.
Also consider having an electrician check the functionality of the RCD. I had mine go bad but thought it was my inverter welder which tripped the RCD when turned on. The welder supplier checked it out and it all tested fine so I called in the electrician who diagnosed the RCD was faulty and replaced it and all good since. The electrician did say it was a good idea to test the RCDs with their test button every 3 months or so.