CNC Guru
Make sure 240v power to Versa Laser is swicthed ON before attempting to run the Versa Laser software
FYI
1. The PC USB powers up the Laser electronics
2. The mains power to the Laser powers up the motors and drives
3. The 3 kettle plug sockets on the Laser , Fan and Compressor unit have 2 fuses in them (Live and Neutral)
FYI
1. The PC USB powers up the Laser electronics
2. The mains power to the Laser powers up the motors and drives
3. The 3 kettle plug sockets on the Laser , Fan and Compressor unit have 2 fuses in them (Live and Neutral)