Hi,
Thinking of selling my Denford Cyclone Lathe.
It is an early 90's model with Fanuc OTA control. Overall the lathe is in very good condition. I have recently checked and adjusted both axis for play.
The machine has a 2.2Kw spindle motor (maximum speed 5000rpm) Servo drives, flood coolant and an 8 station tool changer.
Drip feed has been set up on the OTA control.
I have recently converted the machine from 3 phase to single phase using inverters. No rotary phase converters required, the machine can be plugged into a 16Amp single phase 240v socket.
Please let me know if you have any questions.