Post Processors - Shopbot

[Benny]

Customer writes: I have QuickCAM 3D and I have a shopbot cnc router that I was hoping you would have a post for. I am involved in F1 in Schools Challenge. If not I believe I can import a standard G code file with the software that I have. I am hoping you can help. Thank you.

[Denford Admin]

If the file format is fairly generic, then a post can be done quite quickly.

We just need an example program, what the program is (eg, a box 60mm by 80mm and two arcs: 90deg 52mmRadius, 220deg 43mm radius)