Hi - I am relatively new to CNC and this machine but I am trying to get it up and running.
I have verified the software is upgraded to vr milling 5.66.0.698
I have verified the correct machine is selected
I have checked the spindle fuse and other main fuses - all seem to be intact.
I currently get an "unrecognized error (code 15874)" when I click the "select real machine" button. The status of the machine is stuck on Initializing
It looks like the machine was stopped while running a program the tool is in the material.
Any help is appreciated!
CNC Guru
try running the 'easy upgrade' or 'easy update' can't remember which, it's part of the software on the CD. you should be able to get it to talk to the machine.
I have had this, i was able to solve it by a full deinstall and reinstall of VR5
Pete
I have had this, i was able to solve it by a full deinstall and reinstall of VR5
Pete
CNC Guru
Have you installed the USB driver from the installation menu?
When you select the real machine does it go through the process of searching for the machine and downloading data or do you get the message as you soon as you try to connect?
As easy upgrader works I think you are not too far away. Sounds like it could be the USB driver.
Could you try installing on another PC?
When you select the real machine does it go through the process of searching for the machine and downloading data or do you get the message as you soon as you try to connect?
As easy upgrader works I think you are not too far away. Sounds like it could be the USB driver.
Could you try installing on another PC?
CNC Guru
It may be worth reinstalling VRMilling.
other than that have you got the correct machine selected in VRMilling?
other than that have you got the correct machine selected in VRMilling?
Attempting to install vrmilling on my laptop with the seckey file off the old comp.
Giving me an error.
Is there a specific way I need to move or do the seckey file?
Giving me an error.
Is there a specific way I need to move or do the seckey file?
Put the seckey file in the denford folder on the machine - seems to recognize it and is working.
Now I can't get my laptop to recognize the machine via usb - I will look for drivers I need to install.
Now I can't get my laptop to recognize the machine via usb - I will look for drivers I need to install.