Hi all
With my 250 came a couple of items that really ought to go with a 280 with a D1-3 camlock spindle fitting:
1- A 125mm (not 5") 3-Jaw Burnerd chuck, to which someone had actually fitted a 1.5x8tpi screw backplate. The backplate can come with the chuck if wanted, but the chuck I guess is mostly of interest There are however no camlock pins with it - these are easily available as spares. I've used it with the screw-on backplate on my 250, and it's a nice smooth chuck Only this set of jaws though. I now have a GripTru so don't need this one any more. £80
2- a 180mm/7" driveplate with short and long drive pins. light surface rust, camlock pins are present. £30
Both plus postage, and the chuck in particular is rather heavy. Collection from Stockport is of course welcome.
*pictures now added*
Youra.
Posts: 34
Joined: Sun 22 Apr , 2012 19:38 pm
Attachments:
- 24101636328_1905ebd6de_z.jpg (85.88 KiB) Viewed 8502 times
- 26177114809_c133165200_z.jpg (79.76 KiB) Viewed 8502 times
- 26177112669_f24e8d8db9_z.jpg (81.39 KiB) Viewed 8502 times
- 37239140814_6118b89daa_z.jpg (64.24 KiB) Viewed 8506 times
- 37239200434_50a3f5351f_z.jpg (60.74 KiB) Viewed 8506 times
- 24097291478_5bc7442636_z.jpg (81.68 KiB) Viewed 8511 times
Did you sell the drive plate ?
Posts: 34
Joined: Sun 22 Apr , 2012 19:38 pm
Both items gone I'm afraid..
Posts: 28
Joined: Sun 15 Sep , 2019 14:47 pm
Hardware/Software: Denfird viceroy lathe
Location: Bolton lancs
Hi
Did the backplate go with the chuck
Thanks
Did the backplate go with the chuck
Thanks