LOST SOFTWARE

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1430
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

LOST SOFTWARE

Post by Steve » Mon 24 Jan , 2022 11:45 am

If have lost your software CDs and failed to back up the licence codes you would have to repurchase licences for the products you need. However, if the software is still installed on computers, you will be able to recover the licence files.

If you have bought a second hand machine you would have to purchase new software to operate it unless the origional owner follows the procedures to transfer the licence.

Licences of software cannot be transfered with a machine unless the licence terms are adheared to and the origional discs are returned to Denford to be transfered. See link below.
https://www.denfordata.com/bb/viewtopic.php?f=9&t=6122

There are a few useful links attached below.

How to recover a lost licence of software:
viewtopic.php?f=9&t=2543

How to back up your software:
viewtopic.php?f=61&t=5915

To download the latest version of software:
http://website.denford.ltd.uk/software- ... s-support/

Software compatibility:
http://website.denford.ltd.uk/vista-win ... atibility/

USB to serial Adaptors:
viewtopic.php?f=54&t=5648&p=23310&hilit ... ial#p23310

Post Reply