Mirac DOS software

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Mirac DOS software

Post by bradders » Tue 01 Aug , 2006 8:52 am

I have found version 2.25 of the Mirac software for our lathes, I have installed it but am having problems. Software will do simulations, display coolant on/off operated from front panel, but I can't home or jog using this version, could it be i have a OFFLINE version ? can you help. It happens on both our machines.
Top
User avatar
Mr Magoo
CNC Guru
CNC Guru
Posts: 301
Joined: Tue 21 Feb , 2006 21:45 pm
Location: Brisbane, Australia

Post by Mr Magoo » Tue 01 Aug , 2006 23:31 pm

As a rule of thumb...

- If the software will only run with a dongle connected it's an Offline version.

- If it will only run with a machine conencted it's a machine version

:shock:
Top
Post Reply

Return to “Software”