Material Size on Mill CAM Designer

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
CADJockey
Posts: 3
Joined: Tue 27 Jun , 2006 11:02 am

Material Size on Mill CAM Designer

Post by CADJockey » Tue 27 Jun , 2006 11:07 am

Is there anyway of increasing the maximum permissible material size (290x170) in Mill CAM Designer?
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 27 Jun , 2006 13:42 pm

Have a look in C:\Denford\Config
Edit FanucM.ini with Notepad (or any text editor)
Search for your machine (Triac ?)

Change the appropriate values as shown here:
[Triac PC (metric)]
Library=C:\Denford\Libs\FANUCM.SLB
Extension=FNC
Metric=1
Max Material Length=290
Max Material Width=170
Max Material Height=100


:D
Top
CADJockey
Posts: 3
Joined: Tue 27 Jun , 2006 11:02 am

Post by CADJockey » Tue 27 Jun , 2006 14:46 pm

Fantastic, thanks!
Top
Post Reply

Return to “Software”