F1 Fixture Setup

A collection of projects for Denford machines that can be performed in schools.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

F1 Fixture Setup

Post by Steve » Tue 18 May , 2021 8:40 am

Here is a link to a YouTube Video on the setup and alignment of the F1 Fixture

https://www.youtube.com/watch?v=erTtXYixrEM

Attached are programs for checking the alignment.
JIG SETUP.zip
(4.47 KiB) Downloaded 435 times


Also attached is a couple of programs that can be used to drill axle holes in the F1 Model Block. The Datum has to be set in the center of the hole in the model block. The program should be run prior to machining the car so that the billet is fixed securely.

The axis hole coordinates have to be entered into the program prior to use.
Attachments
Drill Axle Holes.zip
(828 Bytes) Downloaded 362 times

Post Reply