Project of the week: Easter Bunny

A collection of projects for Denford machines that can be performed in schools.

Moderators: Martin, Steve, Mr Magoo

Post Reply
JAllsop
Posts: 2
Joined: Tue 07 Jan , 2020 16:13 pm

Project of the week: Easter Bunny

Post by JAllsop » Mon 30 Mar , 2020 8:58 am

Denford are getting in the Easter spirit with this Router project.

We have used American Maple Wood: 160 x 100 x 20 mm
(These are Denford consumables, part number for 50 billets BI03509G)
IMG_6422.jpg
IMG_6422.jpg (216.23 KiB) Viewed 7701 times
This is the final product. You could if you wanted and have the equipment to hand personalise the bunnies by using a laser cutter and putting names on.

bunny.jpg
bunny.jpg (248.9 KiB) Viewed 7701 times
As you can see if have used tabs for this project. The reason being is we have cut all the way through and adding tabs allows us to do this procedure without snapping the tool and ruining our lovely bunnies.


Bunny Fnc
single bunny.fnc
(35.34 KiB) Downloaded 373 times
Bunny for the Router (CAD)
single bunnyRouter.zip
(27.51 KiB) Downloaded 382 times
Bunny for the Laser (CAD)
single bunny laser.zip
(29.31 KiB) Downloaded 371 times

Post Reply