Project of the Week: Match Stick Box

A collection of projects for Denford machines that can be performed in schools.

Moderators: Martin, Steve, Mr Magoo

Post Reply
Posts: 2
Joined: Tue 07 Jan , 2020 16:13 pm

Project of the Week: Match Stick Box

Post by JAllsop » Fri 10 Jan , 2020 15:14 pm

Create a Match Stick Box

This Project requires an Aluminium Round Bar Billet measuring at least 50 mm x 25 mm, QuickTurn 2D and VRTurning software, a Lathe and a 18 x 1.5mm hand tap.

Made on TURN 270 Pro

For more details contact
IMG-7434.JPG (257.35 KiB) Viewed 8873 times
IMG-7433.JPG (254.5 KiB) Viewed 8873 times
IMG-7432.JPG (229.63 KiB) Viewed 8873 times
IMG-7431.JPG (262.18 KiB) Viewed 8873 times
IMG-7430.JPG (211.61 KiB) Viewed 8873 times

The QuickTurn 2D Files can be Downloaded here:

(2.37 KiB) Downloaded 388 times
(2.4 KiB) Downloaded 407 times

The FNL Files for VRTurning can be Downloaded here:
Match Pot.fnl
(3.78 KiB) Downloaded 429 times
Match lid.fnl
(5.16 KiB) Downloaded 415 times


Check your tooling and offsets before producing the parts. Make sure the tools are set up correctly. For our FNL files we have used the Denford tooling package to suit the 8 Station Turret.

Post Reply