Project of the Week: Match Stick Box

A collection of projects for Denford machines that can be performed in schools.

Moderators: Martin, Steve, Mr Magoo

Post Reply
JAllsop
Posts: 2
Joined: Tue 07 Jan , 2020 16:13 pm

Project of the Week: Match Stick Box

Post by JAllsop » Fri 10 Jan , 2020 15:14 pm

Create a Match Stick Box

This Project requires an Aluminium Round Bar Billet measuring at least 50 mm x 25 mm, QuickTurn 2D and VRTurning software, a Lathe and a 18 x 1.5mm hand tap.

Made on TURN 270 Pro

For more details contact Sales@denford.co.uk
IMG-7434.JPG
IMG-7434.JPG (257.35 KiB) Viewed 9795 times
IMG-7433.JPG
IMG-7433.JPG (254.5 KiB) Viewed 9795 times
IMG-7432.JPG
IMG-7432.JPG (229.63 KiB) Viewed 9795 times
IMG-7431.JPG
IMG-7431.JPG (262.18 KiB) Viewed 9795 times
IMG-7430.JPG
IMG-7430.JPG (211.61 KiB) Viewed 9795 times



The QuickTurn 2D Files can be Downloaded here:

Match lid.zip
(2.37 KiB) Downloaded 415 times
Match Pot.zip
(2.4 KiB) Downloaded 428 times



The FNL Files for VRTurning can be Downloaded here:
Match Pot.fnl
(3.78 KiB) Downloaded 456 times
Match lid.fnl
(5.16 KiB) Downloaded 436 times

TOP TIP:

Check your tooling and offsets before producing the parts. Make sure the tools are set up correctly. For our FNL files we have used the Denford tooling package to suit the 8 Station Turret.

Post Reply