Tether Pully Guide Assembly

Information and tips about the F1 In Schools, 4x4 In Schools and GT Racing in Schools challenges.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
CNC Guru
CNC Guru
Posts: 1430
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Tether Pully Guide Assembly

Post by Steve » Wed 08 Nov , 2023 17:38 pm

This file can be downloaded to produce a pully system to tension the tether guide.
pulley.jpg (6.61 KiB) Viewed 19165 times
PULLEY BRACKET (9.1.18).stl
(55.55 KiB) Downloaded 491 times
The STL can be 3D Printed and one of the F1 in school axles can be used as a shaft for the pulley

The pulleys can be purchased through Rapid Electronics

https://www.rapidonline.com/rapid-25mm- ... 10-37-0381

Post Reply