Page 1 of 1
RS232 Machine Link Cable Details
Posted: Tue 20 Feb , 2007 13:06 pm
by bradders
What are the pin out of a Denford RS232 Machine Link Cable ?
Re: RS232 Machine Link Cable Details
Posted: Tue 29 Jul , 2014 10:55 am
by bradders
For clarification
All Denford's machines (With the exception of Micromill's and Microturn's manufactured for the USA) have a BI01812GG external serial cable connection between them and their PC's.
Micromill's and Microturn's have signal to signal adapter cables i.e. TD - TD, RD to RD, RTS to RTS etc, as the RS232 wiring crossovers are carried out internally on the machines themselves.
A typical external Micromill and Microturn cable would be
Re: RS232 Machine Link Cable Details
Posted: Tue 07 May , 2019 13:40 pm
by Steve
The Micromill and MicroTurn supplied in the USA and Canada have a different external serial cable to all the other machines in the range.
https://www.lindy-international.com/Ser ... 2&pi=30160
All other machines had the BI01812GG external serial cable
viewtopic.php?f=54&t=2351&hilit=BI01812GG