Page 1 of 1
Nextmove 7 Segment LED status and fault display
Posted: Fri 19 Jan , 2007 15:21 pm
by boots
What are the displays and meanings on the Nextmove card 7 segment LED display?
I have a 2 on the display, not an S or 5, a 2. Any Ideas?
Thank You
Posted: Fri 19 Jan , 2007 17:38 pm
by Denford Admin
Take a look at this
stuff/NextStepLEDSWEB.htm
!! Take careful note of what the dot is doing as well as just the number displayed !!
Posted: Thu 15 May , 2008 16:33 pm
by Steve
These alarms refer to the green and new yellow 7 Segment displays.
The Yellow display signifies the next move is ROHS compliant.
Re: Nextmove 7 Segment LED status and fault display
Posted: Thu 27 Jan , 2011 9:07 am
by Steve
The Red Denstep control card has different display indicators.
These are detailed in the following Post:
viewtopic.php?f=54&t=3167
Re: Nextmove 7 Segment LED status and fault display
Posted: Thu 01 Sep , 2011 8:47 am
by Denford Admin
Here are the latest 7 segment led display codes for the Nextmove ST boards (green or orange LEDs)