Novamill Sprint spindle drive 12v+ source

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
bpmsl
CNC Expert
CNC Expert
Posts: 145
Joined: Mon 16 Nov , 2009 10:00 am

Novamill Sprint spindle drive 12v+ source

Post by bpmsl » Sat 27 Aug , 2022 9:33 am

Hi All,
I'm looking to convert my Novamill and have a pwm to 0-10v conversion module to drive the speed demand input. This module requires a 12v+ power supply. Given the floating nature of the 0-10v input is there anywhere on the board I can get an aligned 12v source?

Any thoughts would be great.

All the best
Barry M

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Novamill Sprint spindle drive 12v+ source

Post by Steve » Thu 01 Sep , 2022 15:42 pm

The sprint drive may be unisolated so you must be carfull connecting it to the supply. The 0-10V from the BAldor control card is iscolated

Post Reply