2.4 battety replacement microrouter

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
MikeR
Posts: 12
Joined: Wed 17 Nov , 2021 20:03 pm
Hardware/Software: Denford microrouter 2000? Windows 98

2.4 battety replacement microrouter

Post by MikeR » Sun 21 Nov , 2021 16:00 pm

Hello I want to replace the 2.4 battery on the board . Is it a matter of soldering a new one in ?
7F81233A-2C57-4BFF-8BDF-FE9033D63AED.jpeg
7F81233A-2C57-4BFF-8BDF-FE9033D63AED.jpeg (719.05 KiB) Viewed 4942 times

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: 2.4 battety replacement microrouter

Post by Steve » Tue 23 Nov , 2021 18:42 pm

The battery is not used on the circuit so can be simply removed by cutting the leads with the power off

Post Reply