Hi All
I have been struggling to rewire my easimill control panel.
I am now at the stage of setting up Mach3 with the BoB and drivers and UC100 motion controller using original stepper motors.
Everything seems to power up okay and relevant Led's are lit and I can hear the motors hold.
But for the life of me, I cannot make any of the motors move.
Can anyone help with known settings for the driver and mach3 or advise what I should check.
Thank you.
DENFORD EASIMILL HELP
Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...
Moderators: Martin, Steve, Mr Magoo
Jump to
- Welcome
- ↳ Please read these first...
- ↳ Announcements
- CNC / Machines
- ↳ Machines
- ↳ Compact 1000
- ↳ Cyclone
- ↳ EasiMill / EasiTurn
- ↳ Meteor
- ↳ Micromill / Microturn
- ↳ MicroRouter
- ↳ MicroRouter Compact
- ↳ MicroRouter Vertical / MaxiRouter
- ↳ Mirac
- ↳ Novamill
- ↳ NovaTurn
- ↳ Orac
- ↳ PCB Engraver
- ↳ Quatro
- ↳ Router 2600
- ↳ Senior (Tom)
- ↳ StarMill
- ↳ StarTurn
- ↳ Triac
- ↳ Triton
- ↳ Turn270
- ↳ VersaLaser
- ↳ Viceroy
- ↳ VMC 1300
- ↳ ZeroCentre/ZeroTurn/ZeroBore
- ↳ Electronics
- ↳ Software
- ↳ Downloads
- CAD / CAM Software
- ↳ QuickCAM / LaserCAM 2D Design
- ↳ QuickCAM 3D/PRO/4D
- ↳ QuickTURN 2D Design
- ↳ TechSoft 2D Design
- ↳ Post Processors
- ↳ Solidworks
- ↳ VR Milling - All Versions
- ↳ VR Turning - All Versions
- ↳ Other CAD CAM and CNC
- 3D Printing / Rapid Prototyping
- ↳ UP! 3D Printer
- General
- ↳ Project Of The Week
- ↳ Denford Classifieds
- ↳ F1 / 4x4 / GT Racing In Schools
- ↳ Suggestions and Feedback
- ↳ User Stories / Projects / Courseware
- CIM
- ↳ Robots / CIM / VR CIM
- Random Picture Galleries
- ↳ Vintage Pictures