HI have recently obtained a old denford triac. it has no electronics at all. I plan to run it on mach 3. there are two 24 pin plugs coming from the back of the machine (4 rows of 6 pins). I wonder if anyone Has any info on the wiring of these plugs.
Thanks....Colin
old triac 24 pin connector
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 2
- Joined: Sat 26 Jul , 2014 17:04 pm
- Hardware/Software: Triac
Mach3
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: old triac 24 pin connector
in the triac section there is a manual for your machine.
-
- Posts: 2
- Joined: Sat 26 Jul , 2014 17:04 pm
- Hardware/Software: Triac
Mach3
Re: old triac 24 pin connector
Yes I've looked at that but the only 24 pin connectors in the manual are to the monitor console. The connectors on my machine are from the stepper motors and limit switches etc. So are different from the manual.