Does anyone have any information on the wiring for the Euro card?
I have the following on my Starmill going to the 25 pin RS connector:
6 red
7 sheild
8 purple
9 black
10 brown
11 white
12 blue
17 yellow
19 green
This is the connection to the card from the serial port.
I am trying to identify the purpose of each wire.
Anything would help.
Euro Card Help
Moderators: Martin, Steve, Mr Magoo
-
Rowboat
- Posts: 4
- Joined: Tue 03 Jan , 2012 15:01 pm
- Hardware/Software: Denford starmill
Serial # EO3867/1 and /2
Electronics Serial # 0001140 and OC0001118
Hoping to use Mach3 which I have. - Location: Toronto, Canada
Euro Card Help
It's okay to be crazy, just don't let it drive you nuts!!!
-
Denford Admin
- Site Admin
- Posts: 3636
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Euro Card Help
This shows the 9-way RS232 connection details which will allow you to work out what's what on the 25-way.
viewtopic.php?t=544
Although saying that, those pin numbers you put don't sound right to me - the usual RS232 pins on a 25 way are 2,3,4,5,6,7 and 20
This post has eurocard information:
viewtopic.php?f=15&t=2119
viewtopic.php?t=544
Although saying that, those pin numbers you put don't sound right to me - the usual RS232 pins on a 25 way are 2,3,4,5,6,7 and 20
This post has eurocard information:
viewtopic.php?f=15&t=2119
-
Rowboat
- Posts: 4
- Joined: Tue 03 Jan , 2012 15:01 pm
- Hardware/Software: Denford starmill
Serial # EO3867/1 and /2
Electronics Serial # 0001140 and OC0001118
Hoping to use Mach3 which I have. - Location: Toronto, Canada
Re: Euro Card Help
Thanks.
I will try to digest this and push on!!
I really appreciate the reply.
I will try to digest this and push on!!
I really appreciate the reply.
It's okay to be crazy, just don't let it drive you nuts!!!