Denford senior 200 parameters

Any info relating to Tom Senior mills and lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
hughes674
Posts: 7
Joined: Sat 12 Jul , 2014 13:33 pm
Hardware/Software: denford senior 200 cnc with fanuc ot control.

Denford senior 200 parameters

Post by hughes674 » Sat 12 Jul , 2014 13:48 pm

Hi Everyone
I have just purchased a Denford senior 200 with fanuc ot control built 1990. Would anyone happen to have the original parameters for this machine. I have been told that because the machine has not been used that the battery may have gone flat and lost its setting?

Many Thanks
Michael

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Denford senior 200 parameters

Post by Martin » Mon 14 Jul , 2014 16:01 pm

Have you got the serial number?

hughes674
Posts: 7
Joined: Sat 12 Jul , 2014 13:33 pm
Hardware/Software: denford senior 200 cnc with fanuc ot control.

Re: Denford senior 200 parameters

Post by hughes674 » Mon 14 Jul , 2014 22:29 pm

Hi There
Thanks for your reply. Its a Denford senior 200 1990 with 8 station turret. I am not picking the machine up until Saturday so will be able to provide a serial number then if needed. Are the parameters different between serial numbers? I thought that model would all be the same??

Thanks
Mick

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Denford senior 200 parameters

Post by Martin » Tue 15 Jul , 2014 13:54 pm

The 900 Parameters & 450 Diagnostics may be different depending on options.

I have attached a copy of a set for the Marl machine.
Attachments
MARL.zip
(2.56 KiB) Downloaded 554 times

Post Reply