Denford Senior Junior mill

Any info relating to Tom Senior mills and lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Denford Senior Junior mill

Post by Andy B » Wed 08 Jun , 2011 16:08 pm

Never seen one of these before, not in Denford livery anyhow.

Up for grabs on ebay - http://cgi.ebay.co.uk/Senior-Junior-Mil ... 4aabdfeb9c

I'll get round to scanning the Denford drawings for it one day....

Andy
Attachments
Senior junior Mill.jpg
Senior Junior Mill
Senior junior Mill.jpg (31.62 KiB) Viewed 10004 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Denford Senior Junior mill

Post by Denford Admin » Thu 09 Jun , 2011 9:05 am

A thousand pound bid and still 8 days to go !?!? They must be good :?

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Denford Senior Junior mill

Post by Andy B » Thu 09 Jun , 2011 13:18 pm

It looks to be in hardly-used condition, includes the vertical knuckle head attachment (which can sell on their own for around £300) and it's single phase.
So you get a small footprint machine with the rigidity of the bigger M1's - I don't think you'd find a new machine of that spec and quality for anywhere near that money!

Andy

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Denford Senior Junior mill

Post by Andy B » Wed 03 Sep , 2014 16:31 pm

Sold for £1550!!

Post Reply