Senior Vertical (knuckle) head - gear specs

Any info relating to Tom Senior mills and lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Senior Vertical (knuckle) head - gear specs

Post by Andy B » Wed 21 Apr , 2010 20:03 pm

Admin,

Do the drawings exist for the helical gears in the TS vertical head (the non-quill type)?
A poster on the Yahoo! TS group has asked.

I have a copy of the Denford assembly drawing for this, entitled "TS Vertical Milling Attachment", showing the 2 gears as items 6 & 15. Unfortunately there is no drawing number, and I can't remember exactly where all the Denford Senior drawings were now.

Thanks,
Andy

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Senior Vertical (knuckle) head - gear specs

Post by Denford Admin » Thu 22 Apr , 2010 9:31 am

Sorry I can't find any part drawings either, I think this is the assembly you already have..

Might be worth asking IV if we have any more detail - I can't see why he'd go to the trouble to trace the assembly drawing, but not show any drawing ref's for each part.
Attachments
P1020709 copy.jpg
P1020709 copy.jpg (113.69 KiB) Viewed 12460 times

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Senior Vertical (knuckle) head - gear specs

Post by Andy B » Thu 22 Apr , 2010 13:11 pm

Thanks.
PM sent to IV.

Andy

Andyozz
Posts: 2
Joined: Thu 11 May , 2017 21:31 pm
Hardware/Software: Tom Senior M1

Re: Senior Vertical (knuckle) head - gear specs

Post by Andyozz » Thu 11 May , 2017 21:36 pm

Andy B wrote:Thanks.
PM sent to IV.

Andy
Hello Andy..... Did you have any luck with the drawings for the Knuckle head gears and input shaft..... I have to make a new shaft and gear ...... Fingers crossed

Regards
Andy

Rippor2
Posts: 1
Joined: Sat 12 Oct , 2019 8:08 am

Re: Senior Vertical (knuckle) head - gear specs

Post by Rippor2 » Sat 12 Oct , 2019 8:17 am

Anyone know where i can get this drawing of the vertical head i have bought one in pieces with crashed gears these are being made now but i have a box of shims and thrust bearings with no idea where they go.

Bob

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Senior Vertical (knuckle) head - gear specs

Post by Andy B » Mon 14 Oct , 2019 21:43 pm

I should have it somewhere but it's not scanned yet.
There is a whole bunch of useful large drawings that I was working through to repair so they won't snag as they go through the scanner. I'll see if I can find it.

Andy

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Senior Vertical (knuckle) head - gear specs

Post by Andy B » Wed 23 Oct , 2019 10:06 am

Found my photo of the vertical head drawing.
Posted here - viewtopic.php?f=53&t=3762
Andy

Post Reply