TS Cross-slide and feed nut drawings (Metric)

Any info relating to Tom Senior mills and lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

TS Cross-slide and feed nut drawings (Metric)

Post by Andy B » Tue 09 Feb , 2010 22:06 pm

Drawings for nuts to fit the M1, Major & VS models - request was made for information on the Yahoo Tom Senior group.

Apologies for quality / file size - there was a lot of stuff to get through the day I found these!

Andy
Attachments
DS 224 M Cross slide nut.jpg
Cross slide nut
DS 224 M Cross slide nut.jpg (1013.23 KiB) Viewed 8702 times
DS 39 M Feed nut.jpg
Feed nut
DS 39 M Feed nut.jpg (1.02 MiB) Viewed 8702 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: TS Cross-slide and feed nut drawings (Metric)

Post by Denford Admin » Wed 10 Feb , 2010 10:52 am

I've put them into a (hopefully) more manageable PDF:
Attachments
TS_Cross-slide_and_feed_nut_drawings_Metric.pdf
(1.94 MiB) Downloaded 1076 times

Post Reply