D1-3 camlock chuck and drive plate for sale.
Posted: Thu 26 Oct , 2017 18:16 pm
Hi all
With my 250 came a couple of items that really ought to go with a 280 with a D1-3 camlock spindle fitting:
1- A 125mm (not 5") 3-Jaw Burnerd chuck, to which someone had actually fitted a 1.5x8tpi screw backplate. The backplate can come with the chuck if wanted, but the chuck I guess is mostly of interest There are however no camlock pins with it - these are easily available as spares. I've used it with the screw-on backplate on my 250, and it's a nice smooth chuck Only this set of jaws though. I now have a GripTru so don't need this one any more. £80
2- a 180mm/7" driveplate with short and long drive pins. light surface rust, camlock pins are present. £30
Both plus postage, and the chuck in particular is rather heavy. Collection from Stockport is of course welcome.
*pictures now added*
Youra.
With my 250 came a couple of items that really ought to go with a 280 with a D1-3 camlock spindle fitting:
1- A 125mm (not 5") 3-Jaw Burnerd chuck, to which someone had actually fitted a 1.5x8tpi screw backplate. The backplate can come with the chuck if wanted, but the chuck I guess is mostly of interest There are however no camlock pins with it - these are easily available as spares. I've used it with the screw-on backplate on my 250, and it's a nice smooth chuck Only this set of jaws though. I now have a GripTru so don't need this one any more. £80
2- a 180mm/7" driveplate with short and long drive pins. light surface rust, camlock pins are present. £30
Both plus postage, and the chuck in particular is rather heavy. Collection from Stockport is of course welcome.
*pictures now added*
Youra.