D1-3 camlock chuck and drive plate for sale.

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
YouraT
Posts: 34
Joined: Sun 22 Apr , 2012 19:38 pm

D1-3 camlock chuck and drive plate for sale.

Post by YouraT » Thu 26 Oct , 2017 18:16 pm

Hi all

With my 250 came a couple of items that really ought to go with a 280 with a D1-3 camlock spindle fitting:

1- A 125mm (not 5") 3-Jaw Burnerd chuck, to which someone had actually fitted a 1.5x8tpi screw backplate. The backplate can come with the chuck if wanted, but the chuck I guess is mostly of interest There are however no camlock pins with it - these are easily available as spares. I've used it with the screw-on backplate on my 250, and it's a nice smooth chuck Only this set of jaws though. I now have a GripTru so don't need this one any more. £80

2- a 180mm/7" driveplate with short and long drive pins. light surface rust, camlock pins are present. £30

Both plus postage, and the chuck in particular is rather heavy. Collection from Stockport is of course welcome.

*pictures now added*

Youra.
Attachments
24101636328_1905ebd6de_z.jpg
24101636328_1905ebd6de_z.jpg (85.88 KiB) Viewed 5639 times
26177114809_c133165200_z.jpg
26177114809_c133165200_z.jpg (79.76 KiB) Viewed 5639 times
26177112669_f24e8d8db9_z.jpg
26177112669_f24e8d8db9_z.jpg (81.39 KiB) Viewed 5639 times
37239140814_6118b89daa_z.jpg
37239140814_6118b89daa_z.jpg (64.24 KiB) Viewed 5643 times
37239200434_50a3f5351f_z.jpg
37239200434_50a3f5351f_z.jpg (60.74 KiB) Viewed 5643 times
24097291478_5bc7442636_z.jpg
24097291478_5bc7442636_z.jpg (81.68 KiB) Viewed 5648 times

steamgeek
Posts: 18
Joined: Sun 03 Jan , 2016 17:19 pm
Hardware/Software: Denford Viceroy 280 synchro

Re: D1-3 camlock chuck and drive plate for sale.

Post by steamgeek » Sat 10 Feb , 2018 17:40 pm

Did you sell the drive plate ?

YouraT
Posts: 34
Joined: Sun 22 Apr , 2012 19:38 pm

Re: D1-3 camlock chuck and drive plate for sale.

Post by YouraT » Thu 08 Mar , 2018 23:30 pm

Both items gone I'm afraid..

Artysmarty
Posts: 28
Joined: Sun 15 Sep , 2019 14:47 pm
Hardware/Software: Denfird viceroy lathe
Location: Bolton lancs

Re: D1-3 camlock chuck and drive plate for sale.

Post by Artysmarty » Wed 25 Sep , 2019 23:31 pm

Hi
Did the backplate go with the chuck

Thanks

Post Reply