280vs drawings BVS110-400 & ML100-402

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Paul Page
Posts: 12
Joined: Sun 31 Dec , 2017 17:36 pm
Hardware/Software: Viceroy VS280

280vs drawings BVS110-400 & ML100-402

Post by Paul Page » Tue 18 May , 2021 8:54 am

Does anybody have a copy of the bed arrangement drawing BVS110-400 and Bed ML100-402?

rpwilson
CNC Expert
CNC Expert
Posts: 156
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.

Re: 280vs drawings BVS110-400 & ML100-402

Post by rpwilson » Tue 18 May , 2021 12:08 pm

Yes, I've got a 2 piece photocopy of BVS110 400. Was there anything in particular you needed to know?

Richard

Paul Page
Posts: 12
Joined: Sun 31 Dec , 2017 17:36 pm
Hardware/Software: Viceroy VS280

Re: 280vs drawings BVS110-400 & ML100-402

Post by Paul Page » Thu 20 May , 2021 13:19 pm

I am interested in the details of the bed ways in particular which I assumed would be on ML100-402. If you could scan the photo copies of BVS110-400 I would like to add that to my drawing archive. Paul

rpwilson
CNC Expert
CNC Expert
Posts: 156
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.

Re: 280vs drawings BVS110-400 & ML100-402

Post by rpwilson » Sun 23 May , 2021 21:19 pm

Paul
I've scanned BVS 110 400 but the site here doesn't seem to enable attachments. Are you sure its ML 100 402 you need, the drawing I've got references BVS 100 402.

Regards

Richard Wilson

DavidB
CNC Expert
CNC Expert
Posts: 176
Joined: Tue 19 Oct , 2010 16:06 pm
Hardware/Software: Triac, Orac

Re: 280vs drawings BVS110-400 & ML100-402

Post by DavidB » Mon 24 May , 2021 15:45 pm

You'll find the facility to add attachments at the bottom of the page where you post a reply.

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: 280vs drawings BVS110-400 & ML100-402

Post by Andy B » Tue 01 Jun , 2021 14:56 pm

BVS drawings added to the 280VS and Synchro drawings thread

ML drawing added to the ML drawings thread

Andy

Paul Page
Posts: 12
Joined: Sun 31 Dec , 2017 17:36 pm
Hardware/Software: Viceroy VS280

Re: 280vs drawings BVS110-400 & ML100-402

Post by Paul Page » Tue 08 Jun , 2021 19:22 pm

Many thanks to you all.
The drawings were what I needed.

Post Reply