Download the latest version of the VersaLaser software / drivers here:
V1.28.5
For a first time installation use this:
http://www.denfordata.com/downloads/vl- ... 1-28-5.zip
To upgrade from previous versions use this:
http://www.denfordata.com/downloads/vl- ... 1-28-5.zip
Upgrade instructions:
1) Unzip the upgrade file into a temporary directory on your PC.
2) Close all programs.
3) Close the VersaLASER software by right-clicking on the icon in your taskbar and left-clicking EXIT.
4) From Windows Explorer, run the upgrade.exe file by double-clicking on it.
5) Re-boot your computer.
Versalaser software / drivers v1.28.5
Moderators: Martin, Steve, Mr Magoo
- Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Versalaser software / drivers v1.28.5
Last edited by Denford Admin on Fri 26 Jan , 2007 17:08 pm, edited 1 time in total.
- Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: