Is a VL300 and drivers usable on 64bit win 10?

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
TDIPower
CNC Guru
CNC Guru
Posts: 613
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Is a VL300 and drivers usable on 64bit win 10?

Post by TDIPower » Thu 30 Jan , 2020 0:40 am

Ran into a problem at work today and the long and short of it is out IT guys say the PC attached to the VL 300 had to run 32bit rather than 64bit as the drivers will not work on a 64 bit win10 machine. A recent update had rolled out to the PCs on the network meant this messed up the laser PC as it is 32bit. I just wanted to check if there was an issue running the now quite old VL300 on win 10 64 bit.

Cheers Pete.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Is a VL300 and drivers usable on 64bit win 10?

Post by Martin » Thu 30 Jan , 2020 8:46 am

You can download version 1,30 from our website which includes 32 bit & 64 bit but does say Windows7 & try that.

http://www.denfordata.com/downloads/ulsinst-1.30.zip

TDIPower
CNC Guru
CNC Guru
Posts: 613
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: Is a VL300 and drivers usable on 64bit win 10?

Post by TDIPower » Thu 30 Jan , 2020 21:00 pm

Thanks, I've past the link on so they can play.

Pete

Post Reply