Triton Update with Easy Upgrader

All info relating to the Denford Triton and Triton Pro milling machines. (Project Lead the Way)

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

Triton Update with Easy Upgrader

Post by boots » Wed 15 Oct , 2008 17:33 pm

Triton V2 NS
S/N #u00241/1
Elect. #oc00263572
Late '03 or early '04 model
VR Milling v2.31 (Originally shipped with v2.22)

We are trying to update the NextStep control card (RS-232 only) with Easy Upgrader.
What do we need to do to update the CPLD and the bootloader?

Attached are screen shots of the current settings in Easy Upgrader and the warnings that pop-up.

Can we upgrade to VR Milling v5.24? Or should we stay with v2.31?

Thanks for the help.
Easy Upgrader Error1.JPG
Easy Upgrader Error1.JPG (18.32 KiB) Viewed 3374 times
Easy Upgrader Error2.JPG
Easy Upgrader Error2.JPG (10.37 KiB) Viewed 3374 times
EU Screen Shot.JPG
EU Screen Shot.JPG (60.29 KiB) Viewed 3374 times

User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse

Post by Denford Admin » Fri 17 Oct , 2008 8:55 am

Unfortunately you will have to organise an exchange board from the UK.
Maybe the full USB top board and V5 milling upgrade is the easiest solution in this case ?

Reasons to upgrade to v5: viewtopic.php?t=101
Machine and control upgrade guide: viewtopic.php?t=116

Post Reply