Triton V2 NS
S/N #u00241/1
Elect. #oc00263572
Late '03 or early '04 model
VR Milling v2.31 (Originally shipped with v2.22)
We are trying to update the NextStep control card (RS-232 only) with Easy Upgrader.
What do we need to do to update the CPLD and the bootloader?
Attached are screen shots of the current settings in Easy Upgrader and the warnings that pop-up.
Can we upgrade to VR Milling v5.24? Or should we stay with v2.31?
Thanks for the help.
Triton Update with Easy Upgrader
Moderators: Martin, Steve, Mr Magoo
Triton Update with Easy Upgrader
- Attachments
-
- Easy Upgrader Error1.JPG (18.32 KiB) Viewed 8804 times
-
- Easy Upgrader Error2.JPG (10.37 KiB) Viewed 8804 times
-
- EU Screen Shot.JPG (60.29 KiB) Viewed 8804 times
- Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Unfortunately you will have to organise an exchange board from the UK.
Maybe the full USB top board and V5 milling upgrade is the easiest solution in this case ?
FYI:
Reasons to upgrade to v5: viewtopic.php?t=101
Machine and control upgrade guide: viewtopic.php?t=116
Maybe the full USB top board and V5 milling upgrade is the easiest solution in this case ?
FYI:
Reasons to upgrade to v5: viewtopic.php?t=101
Machine and control upgrade guide: viewtopic.php?t=116