Lifting a 1986 Triac?

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Roy
CNC Expert
CNC Expert
Posts: 104
Joined: Tue 30 Jan , 2007 20:20 pm
Hardware/Software: 1986 Triac modified & running Mach 3
Location: Bucks, UK

Lifting a 1986 Triac?

Post by Roy » Sun 04 Feb , 2007 23:45 pm

Is there an eyebolt fixing on top the main column of the older Triacs (1986), as per the newer ones? If so could someone tell me what the thread is please?
I have to pick one up this week, but havent currently got acsess to the info.
Thanks Roy 8)
Top
User avatar
davidimurray
CNC Expert
CNC Expert
Posts: 194
Joined: Thu 24 Aug , 2006 9:45 am

Post by davidimurray » Mon 05 Feb , 2007 10:08 am

Our 1985 Triac has a hook either side of the column at the rear. These are permanently fitted to the column.

Cheers

Dave
Top
User avatar
Roy
CNC Expert
CNC Expert
Posts: 104
Joined: Tue 30 Jan , 2007 20:20 pm
Hardware/Software: 1986 Triac modified & running Mach 3
Location: Bucks, UK

Post by Roy » Mon 05 Feb , 2007 12:32 pm

Thanks dave, I remember seeing this on some photo's. (Red in colour?)Although from memory the one I shall be getting, these have been removed.
Is there anychance you could tell me the thread size and centres, so i can make some up?

Thanks Roy
Top
User avatar
davidimurray
CNC Expert
CNC Expert
Posts: 194
Joined: Thu 24 Aug , 2006 9:45 am

Post by davidimurray » Tue 06 Feb , 2007 17:05 pm

Hi Roy

Unfortunately I cannot get near our machine at the moment as there is work going on in our workshop.

Cheers

Dave
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Tue 06 Feb , 2007 17:36 pm

Asuming that Denford didn't make different hooks for different machines, then they're M10 and 50mm centres
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 06 Feb , 2007 22:48 pm

ps take a look at the triac manuals here:
https://www.denford.ltd.uk/index.php?opt ... &Itemid=52
Top
Post Reply

Return to “Triac”