Using TRIAC with America voltage 110V 1ph, or 220V 2ph
Posted: Tue 14 May , 2024 3:32 am
Dear all,
I am trying to power on a TRIAC VMC, this machine has been without use for some years now. It is installed in american continent where most of the power is 1phase 110V + 1 neutral; or 2 phases each one 110V (this is our 220 Voltage), and frequency is 60 Hz.
From the dataplate I noted the following:
Voltage: 240V
F.L.C: 11A, 50Hz, 1 Phase
Have you ever had this issue while powering your Denford machine?
Thanks for advising
I am trying to power on a TRIAC VMC, this machine has been without use for some years now. It is installed in american continent where most of the power is 1phase 110V + 1 neutral; or 2 phases each one 110V (this is our 220 Voltage), and frequency is 60 Hz.
From the dataplate I noted the following:
Voltage: 240V
F.L.C: 11A, 50Hz, 1 Phase
Have you ever had this issue while powering your Denford machine?
Thanks for advising
Steve, thanks for advising. I Will look fornthis Transformer, this should be somewhere among the equipment componentes.