Another newbe

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
sa6bsn
Posts: 1
Joined: Tue 03 Aug , 2021 4:17 am
Hardware/Software: Triac vmc

Another newbe

Post by sa6bsn » Fri 20 Aug , 2021 22:48 pm

Hello an thank you for letting me be part of this forum
I am now a proud owner off a Triac vmc with ATC.
I hope I can get some answer from you experts.
1. Before i received my mill i read almost everything I could find on internet on my mill especially technical data.
On thing i read is the spindel motor power and it should be
1.1 kw/ 1.5 HP. But on my mills data plate it says
0.75 kw1 HP do i Have a veaker spindel motor?
2. How can I tell if I have stepper or servo axis motors?
3. Next to the euro card there's a custom card what is that card
4 there is a battery on the euro card what is it used for?
5 is there memory on the euro card that limits the program size ?
My mill is from 1996 . And has a standard computer with harddrive inside the big plack box.

Many question but thanks in advance.

Post Reply