enable g127.5 on triac center

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
redouanemay
Posts: 1
Joined: Sun 14 Feb , 2021 19:50 pm
Hardware/Software: fanuc

enable g127.5 on triac center

Post by redouanemay » Sun 21 Mar , 2021 10:06 am

hello
i have denford triac center with fanuc o-m c controller , i want to enable the drip feeding, when i go to the ladder diagram , i found that R503.5 must be 1 to enable G127.5
but i don't know what did mean R503.5
anyone can help me
thanks a lot

Post Reply