I recently bought a Triac.
Reading through the documentation I can find, it seems like it should have an adjustment screw and a locking screw at the opposite end for each gib. Mine has just the adjustment screw(on X&Y, haven't checked Z yet)
There's no holes for locking screws in the castings.
Is there a locking mechanism located elsewhere on some triacs?
My problem is,not being able to lock the gib, it will work fine in one direction, but slide and bind the axis in the opposite direction.(unless I have it really loose)
Thanks
Alex
No gib locking screw? Triac
All info relating to the Denford Triac series of CNC milling machines
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 1
- Joined: Wed 18 Nov , 2020 23:14 pm
Jump to
- Welcome
- ↳ Please read these first...
- ↳ Announcements
- CNC / Machines
- ↳ Machines
- ↳ Compact 1000
- ↳ Cyclone
- ↳ EasiMill / EasiTurn
- ↳ Meteor
- ↳ Micromill / Microturn
- ↳ MicroRouter
- ↳ MicroRouter Compact
- ↳ MicroRouter Vertical / MaxiRouter
- ↳ Mirac
- ↳ Novamill
- ↳ NovaTurn
- ↳ Orac
- ↳ PCB Engraver
- ↳ Quatro
- ↳ Router 2600
- ↳ Senior (Tom)
- ↳ StarMill
- ↳ StarTurn
- ↳ Triac
- ↳ Triton
- ↳ Turn270
- ↳ VersaLaser
- ↳ Viceroy
- ↳ VMC 1300
- ↳ ZeroCentre/ZeroTurn/ZeroBore
- ↳ Electronics
- ↳ Software
- ↳ Downloads
- CAD / CAM Software
- ↳ QuickCAM / LaserCAM 2D Design
- ↳ QuickCAM 3D/PRO/4D
- ↳ QuickTURN 2D Design
- ↳ TechSoft 2D Design
- ↳ Post Processors
- ↳ Solidworks
- ↳ VR Milling - All Versions
- ↳ VR Turning - All Versions
- ↳ Other CAD CAM and CNC
- 3D Printing / Rapid Prototyping
- ↳ UP! 3D Printer
- General
- ↳ Project Of The Week
- ↳ Denford Classifieds
- ↳ F1 / 4x4 / GT Racing In Schools
- ↳ Suggestions and Feedback
- ↳ User Stories / Projects / Courseware
- CIM
- ↳ Robots / CIM / VR CIM
- Random Picture Galleries
- ↳ Vintage Pictures